Change Currency: GBP

Renolit 762 High Temperature Jointing Compound 225g Tube


Manufacturer: Fuchs

Product Information




Optimum sealing efficiency is attained within the temperature range of 550deg C to 760 deg C but, dependent on the characteristics of the joint faces involved, a satisfactory performance can be achieved over a wider temperature range. For example, the compound is known to be effective from 200deg C to 800deg C in the case of rigid joint faces of good surface finish, which are free from distortion and differential movement at the operating temperatures.

Method of Use

 A thin layer of compound should be spread over each of the faces to be joined by means of a flexible knife blade or spatula.

The faces should be brought into contact as soon as possible after the application of the compound. Joints can be parted after service by tapping with a soft mallet, thus shattering the film of compound which becomes brittle at room temperatures after operation at elevated temperatures. Compound still adhering to the exposed joint surfaces can be cleaned off by soaking in hot water for about one hour followed by wire brushing. Larger faces can be cleaned by applying hot water to the surfaces with a sponge or cloth, then scraping or wire brushing.


General Electric A 15 D 6-S (Interim Approval) - High Temperature Jointing Compound.

Approved by Rolls Royce plc under MSRR 9294.

Recommended for use by: - Pratt and Whitney, Normalair/Garret Turbochargers, Lucas CAV Turbochargers, Mikuni Carburettors

Included in Perkins Service Bulletin TV8.540, Jointing of Exhaust Manifold Sleeves.

Product Code: 762 High Temp


Mazadlos Ltd T/A 710 Oil

Payments securely processed using Sagepay

The Oil Man uses cookies. For more detailed information about these cookies please see our privacy policy. Please accept to continue or block all non-essential cookies.

I accept cookies from this site.